Posts Tagged ‘milling cutter’

I quote a lot of special milling cutters and slitting saws.  Frequently I receive a HSS print with a note from the customer saying that they would like this quoted in carbide tipped.  So I quote the cutter and reduce the number of teeth.  A carbide tipped cutter with the same diameter and width as a […]

Share

In our catalog we have seven pages dedicated to carbide tipped slitting saws and side milling cutters.  With so many choices selecting the correct one can seem a bit confusing.  There is a method to this madness.  One thing to keep in mind is that slitting saws and side milling cutters are pretty much the same […]

Share

Knowing the hardness of the material you are machining is important.  It helps determine the appropriate speeds and feeds for your application and can affect the design of the tool being used in the machining process.  Despite this importance, it is surprising, although very common, that many machinists do not know the hardness of the […]

Share

      Re-tipping or Re-sharpening Carbide Tipped Milling Cutters – A Cost Effective Option to Buying New Tools Cutting Tools are not exactly cheap. One of the best ways to get extended life out of your milling cutters is to have them re-tipped or re-sharpened. This can usually be done at a fraction of […]

Share